5616 Bay St, Emeryville, California, 94608, United States (US)
0

Shopping Cart

  • No products in the cart.
Menu

Tb Woods TB-4J78 Sure-flex Sleeve Coupling Flange Size 4

Tb Woods TB-4J78 Sure-flex Sleeve Coupling Flange Size 4

| Reviews (0)
In Stock

Original price was: $34.32.Current price is: $27.46.

Free shipping on orders over $40

100% Secure & Encrypted Payments

Categories:

Product DescriptionThe TB WOODS TB-4J78 is a Type-J flange hub for Sure-Flex sleeve couplings, sized for coupling size 4 applications with a fixed round keyed bore of 7/8 inch. Manufactured from sintered steel with a carbon steel hub, this flange half transmits rotational power between shafts while absorbing shock loads, angular misalignment up to 1 degree, parallel misalignment, and end float through the flexible sleeve interface. It is rated to a maximum speed of 7,600 RPM and a maximum torque of 156 inch-pounds. Two set screws are included, positioned one over the keyseat and one at 90 degrees, providing secure shaft retention. Licensed HVAC, mechanical, and industrial service technicians install this component in rotating drive train assemblies.This flange hub fits close-coupled drive configurations found in commercial and industrial rotating equipment. Typical applications include motors, pumps, compressors, blowers, mixers, and conveyors where shaft misalignment and vibration must be controlled. The 4-way flexing action of the Sure-Flex sleeve design makes this flange compatible with both EPDM and neoprene sleeve materials, supporting environments where chemical resistance and oil resistance are required. The inch-measurement bore and standard keyway sizing integrate directly with common shaft and keyseat dimensions used across industrial drive platforms.Key FeaturesType-J close-coupled flange hub rated to 7,600 RPM and 156 inch-pounds maximum torqueFixed round keyed bore at 7/8 inch with bore tolerance of +0.0005 inch to +0.0015 inch3/16 inch x 3/32 inch keyway accommodates standard keyed shaft connectionsTwo set screws included: one over keyseat and one at 90 degrees for positive shaft lockAbsorbs angular misalignment up to 1 degree (EPDM/neoprene sleeves), parallel misalignment, shock, and end floatOil-resistant and chemical-resistant construction suitable for demanding industrial environmentsCompatibilityDesigned for use with TB WOODS Sure-Flex size 4 sleeve coupling assemblies in motors, pumps, compressors, blowers, mixers, and conveyors. Compatible with both EPDM and neoprene Sure-Flex sleeves. No bushing is required for this bore configuration.Installation NotesInstallation is performed by qualified mechanical technicians or millwrights. De-energize and lock out the drive motor before installing or removing any coupling component. Ensure the shaft and bore are clean and free of burrs before pressing the flange onto the shaft and seating the set screws. Verify sleeve condition and alignment within the specified angular and parallel misalignment limits before returning the drive to service.Technical SpecificationsCoupling Size: 4Maximum Torque: 156 inch-poundsMaximum Speed: 7,600 RPMMaximum Angular Misalignment: 1 degree (EPDM/neoprene sleeves)Bore Diameter: 7/8 inchBore Type: Fixed Round KeyedBore Tolerance: +0.0005 inch / +0.0015 inchKeyway Size: 3/16 inch wide x 3/32 inch deepOutside Diameter: 2.5 inchesHub Diameter: 1 5/8 inchesHub Body Length: 27/64 inchLength Through Bore: 55/64 inch (approximately 0.86 inches)Screw Thread Size: 1/4 inch-20Included Hardware: 2 set screwsHub Type: Type-J Flange Close CoupledHub Material: Carbon SteelBody Material: Sintered SteelResistance Properties: Chemical Resistant, Oil ResistantMisalignment Types Accommodated: Angular, ParallelWeight: 0.4 poundsCountry of Origin: United StatesStandard InformationBrand: TB WOODSManufacturer Part Number: TB-4J78

Add a Review

Your email address will not be published. Required fields are marked *

Related Products

Free Delivery

Free shipping on orders
over $40

Secure Payment

We ensure your money is
safe

Customer Support 24/7

Instant access to
Support

Money-Back Guarantee

30 Days Money-Back
Guarantee