Nvent PGH3S6 Three Hole Strap 600mm

Product DescriptionThe NVENT PGH3S6 is a three-hole pipe strap designed for securing conduit, pipe, or tubing runs in electrical and mechanical installations. At 600mm in span length, this strap provides a solid, multi-point anchoring solution that distributes load across three fastening points, reducing stress on individual mounting positions. It is a standard hardware component installed by electricians, plumbers, and pipefitters during rough-in or retrofit work where secure, low-profile pipe support is required. The three-hole configuration increases pull-out resistance compared to single-hole alternatives and keeps runs aligned on long straight sections.This strap suits residential and light commercial applications where conduit, pipe, or tubing must be anchored to framing, concrete, or structural steel. It is appropriate for both surface-mounted and embedded installations depending on the mounting hardware selected. Installers working on EMT, rigid conduit, copper, PVC, or similar round runs will find this format a routine fit for standard support-spacing requirements set by NEC or IPC guidelines.Key FeaturesThree-hole design provides multi-point anchoring for improved load distribution600mm span accommodates longer support runs without splicing multiple strapsLow-profile form factor keeps pipe or conduit close to the mounting surfaceCompatible with standard fastener hardware for concrete, wood, or steel substratesCompatibilityDesigned as a general-purpose three-hole pipe strap suitable for securing round conduit, pipe, or tubing in electrical and mechanical support applications.Installation NotesInstallation is typically performed by licensed electricians or pipefitters as part of a conduit or piping support system. De-energize all circuits and depressurize any associated piping before mounting hardware in the work area. Use fasteners rated for the substrate type concrete anchors, wood screws, or self-drilling metal screws as appropriate and maintain support spacing per applicable NEC or IPC code requirements. Do not overtighten fasteners, as deforming the strap can compromise its clamping geometry and load rating.Technical SpecificationsSpan Length: 600mmMounting Holes: 3Weight: 4 poundsUPC: 78351090560Standard InformationBrand: NVENTManufacturer Part Number: PGH3S6