Nutech NuPool Pacific Blue Pool Paint

Please note, that all Pool Paints are factory tinted for colour consistency and will take 5-6 business days to order in your selected colour. Delivery times can vary from 10-12 days on Pool Paint orders.2K EPOXY CONCRETE COATINGNuPool is a high build, two-component gloss epoxy coating that is impervious to water and moisture and is suitable for use as a quality swimming pool coating for new concrete pools, or re-coating aged 2K epoxy coated pools. This two pack pool paint is long wearing and can be used in conjunction with Nutech Anti-Slip.NUPOOL FEATURESResistant to salt water and pool chlorination chemicalsAlgae ControlledDurableSafe for fish and mammalsEasy to maintainBrush or roller application13 standard coloursColour matching availableAPPLICATIONEQUIPMENT & TOOLSBrush or RollerPressure washer and vacuum cleanerDrop sheets, cardboard or old tarps___PREPARATIONDegrease the entire pool with Nu-EcoSafe High Strength DegreaserPressure clean the entire pool with a >2000psi pressure washerEnsure all stains, oil and chemical residue is removed. Repeat cleaning process if neededFor bare concrete, etch the surface using Nu-EcoSafe Etch and rinse wellFor old or existing 2K epoxy surfaces, sand or abrade the entire surfaceMake any spot repairs to cracks or chipsVacuum the entire pool with a soft bristle head. Ensure that all debris has been removedCreate a safe mixing area near the pool with drop sheets, tarps or cardboardCOAT ONEMix the first coat of NuPool using the 3:1 ratio (2-part kit) by adding NuPool Part B into NuPool Part AMix the 2 parts together throughly using a drill mixerAdd EPiC Epoxy 500 Thinner (approx 20%) and mix againAllow the paint to stand for 10 minutes before applicationUse a brush to cut in all edges and corners with NuPool, then roll to cover the surfaceAllow to dry for 5 hours (temperature dependant), before applying the second coatDO NOT wait more that 48 hours before applying a second coatCOAT TWOMix the second coat of NuPool using the 3:1 ratio (2-part kit) by adding NuPool Part B into NuPool Part AMix the 2 parts together throughly using a drill mixerAllow the paint to stand for 10 minutes before applicationUse a brush to cut in all edges and corners with NuPool, then roll to cover the surfaceAllow to dry for 5 hours (temperature dependant)NON-SLIPTo create a non-slip surface, apply Nutech Coarse Anti-Slip to the second coat while it is still wetIf anti-slip has been applied, use a third coat of NuPool over the areasCURINGNuPool takes 7 days to completely cure into a hard and durable surface. During this time, the pool must be kept dry. If the surface becomes wet, remove all water and allow to continue curing.SAFETY PRECAUTIONSProper safety procedures should be followed at all times while handling the product.DO NOT allow degreasers or acid etchers to dry on the pool surface. This may cause adhesion issues.Refer to the Material Safety Data Sheet for important health and safety information before use.epic-epoxy-500-thinners