Name: Lexmark 41X2234 Maintenance Kit 230V 225k
SKU: OFFC-40FA78
Availability: InStock

Description
Reviews (0)

OEM Code	41X2234 – 225K Maintenance kit, belt SY fuser (230 V A4 LRP, Type 01)
Related Part Numbers	41X2237 – 225K Maintenance kit, belt SY fuser (230 V LTR LRP, Type 04) 41X2239 – 225K Maintenance kit, belt SY fuser (230 V A4 NLRP, Type 06) 41X2251 – 400K Maintenance kit, belt HY fuser (230 V A4LRP, Type 33) 41X2253 – 400K Maintenance kit, belt HY fuser (230 V LTR LRP, Type 36)
Manufacturer / Brand	Lexmark
Manufacture Type	Genuine
Product Type	Fuser Maintenance Kit, Belt SY Fuser (230 V A4 LRP, Type 01)
Estimated Yield / Duty Cycle	Approximately 225,000 pages based on 5% average page coverage
Machine Section	Fusing
Suitable Printer Models	Lexmark XM7370 Lexmark XM7355 Lexmark MX826ade Lexmark MX822adtfe Lexmark MX826adtfe Lexmark MX826adxe Lexmark MS823dn Lexmark MS823n Lexmark MS821dn Lexmark MS822de Lexmark MS821n Lexmark MX822adxe Lexmark MX822ade Lexmark XM5365 Lexmark MX721adhe Lexmark MX722ade Lexmark MX721ade Lexmark MX722adhe Lexmark MB2770adhwe Lexmark MS825dn Lexmark MS826de Lexmark B2865dw Lexmark M5255 Lexmark M5270 NOT SUITABLE FOR THE MODELS BELOW: MS725 MS721 MX725
Package Includes	1 x Fuser 220v (41X1116) 3 x Pick rollers (41X1108) 3 x Tray separators (41X1119) 1 x Transfer roller (41X1076)
Description	PLEASE CHECK YOUR OLD FUSER PART NUMBER BEFORE ORDERING. The fuser maintenance kit contains the fuser, 3 pick rollers, a transfer roller and 3 separation rollers. Recommended replacement every 225,000 pages*. Replacing fuser maintenance kits. There are multiple warnings to indicate that the fuser is nearing end of life and that a maintenance kit is required, Check the error code and contact a Lexmark authorised dealer or service centre such as InkMasters. The code will inform you the fuser has reached its rated life and the printer stops until a maintenance kit is installed. You must install the correct Fuser Maintenance Kit for the type of fuser that is installed in the printer. Check the 2 digit type code on the fuser, or check Device Information using the embedded web server or the menus page for a replacement part number. To identify the fuser type, open door A, and then remove the toner cartridge and imaging unit. Find the twodigit fuser type in front of the fuser, for example, 00 or 01.(WarningPotential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.) Using certain types of paper may require more frequent replacement of the maintenance kit. The separator assembly, fuser, pick roller assembly, and transfer roller are included in the maintenance kit and can be ordered individually and replaced if necessary.