Carrier crmandpr002a03 Manual Damper Hvac

Product DescriptionThe CARRIER crmandpr002a03 is a genuine OEM manual damper designed for use in HVAC air distribution systems. A manual damper controls airflow through ductwork by allowing a technician to mechanically adjust the blade position, balancing or shutting off flow to a specific zone or branch. This replacement part maintains the same fit, form, and function as the original factory component. Licensed HVAC technicians and experienced service professionals are the intended installers for this type of component.This manual damper is suited for residential and light commercial HVAC duct systems where airflow balancing or zone isolation is required. It is installed within the duct run at a point where manual airflow control is needed, such as a branch takeoff or supply trunk. The compact 1 inch form factor makes it applicable in tight duct configurations where space is limited.Key FeaturesGenuine OEM Carrier replacement part ensuring factory-spec fit and functionManual blade adjustment for direct, mechanical airflow control without the need for an actuator or controllerCompact 1 inch x 1 inch x 1 inch footprint suitable for space-constrained duct installationsDesigned for airflow balancing or zone shutoff in ducted HVAC systemsCompatibilityDesigned as an OEM-style replacement manual damper for Carrier ducted HVAC air distribution systems.Installation NotesInstallation should be performed by a licensed HVAC technician. Before beginning work, shut down the air handling system and confirm the unit is de-energized at the disconnect or breaker. Secure the damper in the duct run per the manufacturer installation guidelines and verify blade movement is unobstructed before restoring system operation. Follow all applicable local mechanical codes during installation.Technical SpecificationsLength: 1 inchWidth: 1 inchHeight: 1 inchStandard InformationBrand: CARRIERManufacturer Part Number: crmandpr002a03