Carpenter Paterson 126ct-112 Copper Plated Riser Clamp

Product DescriptionThe CARPENTER PATERSON 126ct-112 is a 2-piece, 2-hole extension riser clamp designed for the support of un-insulated vertical copper tubing in stationary installations. Finished in copper plating over carbon steel, it is built to handle a load rating of 220 pounds and fits 1.5-inch pipe. This clamp meets ASME B31.1, MSS-SP-58 Type 8, and AA-1192A Type 8 standards, making it suitable for commercial, industrial, pharmaceutical, petrochemical, and hospital piping systems. Plumbers and pipefitters install this clamp to secure vertical risers where no pipe movement is expected.The 126ct-112 is intended for vertical tubing support in stationary, un-insulated piping runs. It is not designed to be suspended from threaded rod. Typical applications include commercial and industrial mechanical rooms, hospital utility corridors, pharmaceutical process piping, and petrochemical facilities where copper-plated hardware is specified for corrosion resistance or aesthetic match to copper piping systems. Packaged 25 units per box, making it practical for contractors working on multi-riser projects.Key Features220-pound load rating for secure vertical riser supportCopper-plated carbon steel construction for corrosion resistance compatible with copper piping2-piece, 2-hole extension riser design for straightforward installation on vertical runsMeets ASME B31.1, MSS-SP-58 Type 8, and AA-1192A Type 8 standardsFits 1.5-inch pipe sizePackaged 25 per box for multi-unit projectsCompatibilityDesigned for use with 1.5-inch un-insulated vertical copper tubing in stationary piping systems across commercial, industrial, pharmaceutical, petrochemical, and hospital applications.Installation NotesThis riser clamp is installed by licensed plumbers or pipefitters working on vertical piping runs. Shut off system pressure and drain the line before securing clamps to any active piping. This clamp is not designed for rod suspension do not use it as a hanger supported from threaded rod. Follow applicable ASME B31.1 and MSS-SP-58 guidelines for clamp placement, spacing, and load distribution on vertical risers.Technical SpecificationsType: 2-Piece, 2-Hole, Extension RiserPipe Size: 1.5 inchesOverall Length: 10.125 inchesClamp Material: Carbon SteelFinish: Copper PlatedLoad Rating: 220 poundsNumber of Screws/Bolts: 2Applicable Standards: ASME B31.1, MSS-SP-58 Type 8, AA-1192A Type 8Application: Commercial, Industrial, Pharmaceutical, Petrochemical, HospitalPackaging Quantity: 25 per BoxWeight: 0.8 poundsWarranty: 1 Year LimitedStandard InformationBrand: CARPENTER PATERSONManufacturer Part Number: 126ct-112